The short version: Purism is crowdfunding a second version of its Librem 5 Linux phone, and the headline change is the processor. The Librem 5 v2 swaps the quad-core Arm chip in the original for an eight-core RISC-V chip, doubles memory to 8 GB, moves to dual SIM and keeps the same repairable case and 5.7-inch screen. It costs $1,599, Purism states that there are no refunds, and delivery is estimated at 14 to 15 months after the campaign closes on 15 February 2027.
What changes in the Librem 5 v2
Purism lists the full specification on the campaign page. The case, the 5.7-inch 720×1440 screen and the 4,500 mAh removable battery carry over from the current Librem 5, which is deliberate: owners can later buy the new electronics, and repair shops keep the same parts.
Everything underneath is new. The v2 uses an eight-core SpacemiT K1 RISC-V CPU, 8 GB of RAM, 128 GB of storage, dual SIM and a faster card reader.
| Spec | Librem 5 | Librem 5 v2 |
|---|---|---|
| CPU | i.MX 8M Quad, 4 cores, Arm |
SpacemiT K1, 8 cores, RISC-V |
| RAM | 3 GB |
8 GB |
| Storage | 32 GB eMMC |
128 GB |
| microSD | 10-14 MB/s |
80 MB/s |
| SIM | Single | Dual |
| Video | SD, software encoded | HD, hardware encoded |
| 5G | No | Not yet |
Both phones keep the kill switches, the 13 MP rear camera and the smart card slot.
Why RISC-V, and what Purism says could go wrong
Purism’s argument is about firmware. The company says no Arm64 CPU suitable for a smartphone exists without proprietary blobs, that most use reference designs from one vendor, and that RISC-V has several independent core designers and a royalty free instruction set.
It also means building a phone platform in public. Purism’s risks section lists the problems without softening them: 3D graphics need complete support and optimisation, most peripherals are not in mainline Linux and drivers must be ported from the vendor’s 6.6 kernel, Arm64 emulation has to be fast enough for Flathub and Android apps, Firefox needs more work on RISC-V, and power management is recent enough to need changes throughout the stack.
Jonathon Hall, Purism’s CTO, states the bet plainly on the campaign page: “RISC-V is the future, and Librem 5 v2 is the perfect product to bring it to a mainstream audience.” The phone does not exist yet, and the software work is the larger half of the project.
What $1,599 buys, and when it arrives
The reward is $1,599 for the phone alone. Adding AweSIM cellular service costs the same up front plus $99 a month from shipment. A payment plan takes $129 now and $99 a month for 15 months. Add-ons include a development kit at $1,599 and the original Librem 5 at $799.
The campaign closes on 15 February 2027, and from then Purism estimates 6 to 7 months for a development kit and 14 to 15 months for the phone, with a beta in the fourth quarter of 2027. That puts production in 2028, after seven hardware iterations.
Three terms matter. Rewards are not guaranteed, cost overruns are likely, and there are no refunds. Parts to upgrade an existing Librem 5 go on sale after production, not during the campaign. 5G is absent; Purism says a future 5G modem is planned that should fit both phones.
On 16 November the page showed 53 of 2,500 orders, about 2 percent. Stretch goals would move mainboard assembly to Purism’s own facilities at 5,000 orders, add a case at 7,500 and a dock at 10,000. Public ordering opens on 17 November per the campaign’s incentives table, with a Founders Edition for the first 100 and a bootable SD card included before 1 December.
What this means for Ubuntu users
None of this runs Ubuntu. The v2 ships PureOS, Purism’s own GNU/Linux system, so it is not an Ubuntu phone. Two pieces of the work still matter on a desktop.
The first is graphics. Purism says it is building on Mesa’s existing support for Imagination B-series GPUs and that work done for the K1’s GPU will benefit other K1 boards. That is the same Mesa stack Ubuntu uses, so effort spent getting 3D acceleration working here lands in a project Ubuntu readers already run.
The second is app compatibility. Purism’s FAQ points to Waydroid, a container that boots a full Android system on a Wayland desktop, for apps with no native build. It needs no Librem 5 and runs on Ubuntu now. If you want a phone that actually runs Ubuntu, see our Ubuntu Touch download guide.
How to run Android apps on Ubuntu today
Waydroid needs a Wayland session, the default since Ubuntu 22.04. On 26.10 and newer it is in the Ubuntu archive:
On older releases, including 26.04 LTS, add the Waydroid repository first, then run the install command again:
Start Waydroid from the applications menu and let its first-run setup download the Android image. After that, you can open the full Android interface in a window:
Primary sources: Purism, Librem 5 v2 crowdfunding campaign page (specifications, rewards, timeline, risks, FAQ); Purism, Librem 5 product page for the first-gen specifications; Waydroid install instructions.
